MicroCraft Feature Image
[restabs alignment="osc-tabs-left" responsive="true" text="More"] [restab title="Moving Probe Tester" active="active"] S Series
ESM6151 Max. Test Area: 24×20″(610x510mm) 8 Probe Full Floating System MicroCraft’s revolutionary Linear Guide Motion System, PDM, High speed measurement electronics coupled with the latest in Software optimization insures the fastest possible test.

  M Series

EMX6151 Max. Test Area: 24×20″(610x510mm) Standard Model M-Series are high speed and accuracy Models. Supporting a wide range of capabilities from flexible circuits with unique clamping, to oversized backplanes.
EMX8161 Max. Test Area: 32 x 24″(810x610mm) Large Model Supports back plane and large multiple layer board.

H Series

EHX4033/EHX6151 Max. Test Area: 15.7×13″(400x330mm)/24×20″(610x510mm) High Accuracy Model Designed for testing highly dense fine pitch boards like MCM, BGA, Flip Chip, etc.

  L Series

  ELX6146 Max. Test Area: 24×19.7″(610x500mm) Affordable Model This is the latest EMMA series affordable model that offers low damage, high-speed and high-accuracy test.

  A Series

EHA2533 Max. Test Area: 9.8×13″(250x330mm) Flexible board dedicated model with Unloader. Two shuttles drives top and bottom sandwich plates. Bottom shuttle moves immediately back to original position after inspection makes overall process automated, efficient and fast.
EHA4033 Max. Test Area: 15.7×13″(400x330mm) Medium and Mass Production Model with Auto Loader Utilizes in-line carrier system with the use of conveyor rail and can be integrated to various carrier lines.
ELA6146/EMA6151 Max. Test Area: 24×18″(610x460mm)/24×20″(610x510mm) Medium and Mass Production Model with Auto Loader 24 hour unattended Loader/Unloader is now available for the most demanding ELX/EMX testing environments. Automated stamping of OK and NG are available in panel and image modes.

F Series

FHX6151 Max. Test Area: 24×20″(610x510mm) Flat Bed Model for Flexible Boards Designed for testing flexible boards like COF, TAB, etc.
FHX4033 Max. Test Area: 15.7×13″(400x330mm) Flat Bed Model for Flexible Boards Designed for testing flexible boards like COF, TAB, etc

About MicroCraft

MicroCraft, established in 1972, continues technological developments that keeps MicroCraft a world leader in product development and customer satisfaction. MicroCraft’s Moving Probe tester takes pride in becoming the industry-wide standard for electrical test worldwide. With a wide range of customers, MicroCraft satisfies all needs and requirements. MicroCraft now ventures in Drop on Demand Ink Jet Printers. For the last 5 years, MicroCraft has been working with key industry ink suppliers to bring Ink Jet technology to the world wide marketplace. JetPrint, now is ready to change the PCB industry imaging needs. By lowering costs, and improving yields, this product is sure to see the success of our testing products. In response to the worlds electronic needs, MicroCraft takes the challenge and continues to deliver beyond expectations.

Local Support

Providing customer with the right advice and therefor enhanced in productivity, is our priority! If there is any enquiries or support request, please contact us!  

[/restab] [restab title="Ink Jet Printer"]

  JetPrint Series   JetPrint Series is an on-demand inkjet printing system which can help you cut down the cost and manufacturing process. High speed digitalization is possible for etch resist, solder mask and legend printing.

JetPrint allows high quality printing while eliminating process steps, reducing material and labor costs. MicroCraft offers the solution to win the quick turn, high-mix low-volume production market.  
MJP6151KMK/KMH/KL Max. Printing Size: 24×20″(610x510mm) Max. Printing Size: 30.7×24″(780x610mm)On board UV pinning optimizes productivity with JetPrint. JetPrint allows fast and easy printing of single and doubled sided printing requirements. All this while lowering your printing costs.


[/restab] [restab title="TDR Tester"]   TDR tester allows high speed, high accuracy impedance measurement automatically from packages to high frequency boards.   TDR Series  

HT6060 Max. Test Area: 23.6×23.6″(600x600mm) Automated Single-Sided TDR Measurement System Single End and Differential impedance Measurements are available. MicroCraft’s unique Rotating Head and Neutralizing via static discharge are included. Automated version is available.


HTA2525 Max. Test Area: 9.8×9.8″(250x250mm) TDR Measurement System with Auto-Loader Equipped with built-in auto loader and un-loader. Up to 50 units can be installed for automatic testing. Compact body for installation in limited space.
TDR4033 Max. Test Area: 12.6×10.6″(320x270mm)/9.6×10.6″(230x270mm) Automated Double-Sided TDR Measurement System The TDR4033 incorporates a High Accuracy mechanical stage capable of testing fine pitch PCBs.With high-speed packaging right around the corner, the TDR3030 is ready for High Accuracy/Resolution type measurements.


MZPC50 TDR Measurement Machine High performance/low cost MZPC can perform 30PS of rise time because of performance upgrade.


MX4030/MX6060 Max. Test Area: 15.7×11.8″(400x300mm)/23.6×23.6″(600x600mm) Manual TDR Measurement Table Stable measurement with vertical contact ofprobe at constant pressure is possible. MZPC series can be connected for single end and differential impedance measurement.
[/restab] [/restabs]