Ucamco

  • Our laser photoplotters are available in various throughput and fine-line capability models to best suit our customer’s photo tooling production needs.

    However all models share the common basic qualities:

    • Straightforward and robust ‘maintenance free’ design – unbeaten reliability
    • Automated stress-free film handling – highest geometric accuracy
    • Seamless integration with existing CAM systems
    • Fully configurable = drop-in system to replace or complement existing photoplotter
    • Inch and mm resolutions on one and the same system

    Our top model photoplotters further differentiate themselves by their:

    • Unrivaled throughput on all resolutions
    • Unequaled accuracy
    • Fine-line capabilities only rivaled by glass-mask photoplotters

    The three available model groups are:

    • SilverWriter 8000 series – our field-proven industry workhorse
    • Calibr8tor series – the reference unparalleled ‘glass master’ replacement
    • BG7500 large format series – PCB industry’s largest film drum photoplotter
  • SilverWriter 8000 Series

    SilverWriter 8000-P Series
    The SilverWriter 8000-P series introduces sophisticated new film-handling and operational sequencing to deliver up to 60%more films per hour than Mania Technologie’s previous market leader, the SilverWriter 800.

    SilverWriter 8000-HD Series
    The SilverWriter 8000-HD series has been developed in response to industry demands for a photoplotter which delivers ultra-sharp edge definition and very precise line-width control but without the very high plot resolutions needed for features down to 10microns.

    SilverWriter Phoenix-P
    The global PCB industry remains committed to phototooling as its key imaging technology but the most advanced products require films with glass master sharpness and accuracy. The SilverWriter Phoenix-P has meets this challenge using sub-micron imaging technology at resolutions up to 40,640 ppi providing ultra-precise results.

    About Ucamco

    Ucamco (former Barco ETS) is a market leader in PCB CAM software and laser photoplotting systems. We have more than 25 years continuous experience developing and supporting leading-edge front-end tooling solutions for the global PCB industry. We help fabricators world-wide raise yields, increase factory productivity, and cut enterprise risks and costs.

    Today we have more than 1000 laser photoplotters and 5000 CAM systems installed around the world with local support in every major market. Our customers include the leading PCB fabricators across the global spectrum. Many of them have been with us for more than 20 years.

    Key to this success has been our uncompromising pursuit of engineering excellence in all our products. For 25 years our product goals have been best-in-class performance, long-term reliability, and continuous development to keep each user at the cutting-edge of his chosen technology.

    CAM Products
    Our CAM solutions integrate PCB product engineering from your customer’s CAD system through your sales office and down to your shop-floor to cut out costs, speed up your production cycle and enhance yields, whether you make conventional, HDI, flexible or flex-rigid circuitry.

    Photoplotter Products
    Our laser photoplotters are accepted world-wide as the benchmark for accuracy, throughput and reliability. We offer a choice of “drop-in” models for customers who want the highest plot speed, or the finest features (down to 4micron), or the best all-round combination of speed, resolution and price.

    Local Support

    Providing customer with the right advice and therefor enhanced in productivity, is our priority! If there is any enquiries or support request, please contact us!

  • Calibr8tor Series

    Calibr8tor 2000 Series
    The calibr8tor 2000 series sets a new global benchmark for plot speed and image accuracy on features down to 10 microns. New optics, high-speed electronics and the new SmartRip double the plot speeds of our SilverWriter series.

    Calibr8tor 2000 HD Series
    The latest calibr8tor 2000-HD series sets a new global benchmark for plot speed and image accuracy on features down to 7 microns. New HD optics, high-speed electronics and the new SmartRip double the plot speeds of our SilverWriter series.

    Calibr8tor 3000 Series
    The new calibr8tor 3000 delivers an unrivalled combination of plot throughput, image accuracy and operational flexibility. Designed for high-technology PCB fabricators, calibr8tor 3000 offers plot resolutions from 4000 to 25400 ppi to tackle all plotting tasks from standard production to specialist applications with features down to 10 microns.

    Calibr8tor 6000 Series
    The calibr8tor 6000 series combines fastest-in-class plot throughput with ultra-precise image quality at resolutions up to 40,640 ppi on line-widths down to 5 microns.

    Calibr8tor 7000 Series
    Imaging BGA and chip-scale PCBs and micro-miniaturized lead-frames needs “glass-master” accuracy – but not at the cost of reduced film throughput. The new calibr8tor 7000 combines fastest-in-class plot throughput with ultra-precise image quality at resolutions up to 50,800 ppi on line-widths down to 5 microns.

    Calibr8tor nano
    The calibr8tor nano series combine fastest-in-class plot throughput with ultra-precise image quality at resolutions up to 50,800 ppi on line-widths down to 4 microns providing glass master sharpness.

    About Ucamco

    Ucamco (former Barco ETS) is a market leader in PCB CAM software and laser photoplotting systems. We have more than 25 years continuous experience developing and supporting leading-edge front-end tooling solutions for the global PCB industry. We help fabricators world-wide raise yields, increase factory productivity, and cut enterprise risks and costs.

    Today we have more than 1000 laser photoplotters and 5000 CAM systems installed around the world with local support in every major market. Our customers include the leading PCB fabricators across the global spectrum. Many of them have been with us for more than 20 years.

    Key to this success has been our uncompromising pursuit of engineering excellence in all our products. For 25 years our product goals have been best-in-class performance, long-term reliability, and continuous development to keep each user at the cutting-edge of his chosen technology.

    CAM Products
    Our CAM solutions integrate PCB product engineering from your customer’s CAD system through your sales office and down to your shop-floor to cut out costs, speed up your production cycle and enhance yields, whether you make conventional, HDI, flexible or flex-rigid circuitry.

    Photoplotter Products
    Our laser photoplotters are accepted world-wide as the benchmark for accuracy, throughput and reliability. We offer a choice of “drop-in” models for customers who want the highest plot speed, or the finest features (down to 4micron), or the best all-round combination of speed, resolution and price.

    Local Support

    Providing customer with the right advice and therefor enhanced in productivity, is our priority! If there is any enquiries or support request, please contact us!

  • BG7500 large format series

    BG7500 large format series

    The BG75800 is an external drum laser photoplotter. It has an automatic film loader and on-line connection to the film processor. The film handling system is very simple, to maximize accuracy and reliability.

    The bg75800 produces high quality photo tools for high density PCB, BGA, lead frame, stencil, Flat Panel Displays and Chemical Milling

    About Ucamco

    Ucamco (former Barco ETS) is a market leader in PCB CAM software and laser photoplotting systems. We have more than 25 years continuous experience developing and supporting leading-edge front-end tooling solutions for the global PCB industry. We help fabricators world-wide raise yields, increase factory productivity, and cut enterprise risks and costs.

    Today we have more than 1000 laser photoplotters and 5000 CAM systems installed around the world with local support in every major market. Our customers include the leading PCB fabricators across the global spectrum. Many of them have been with us for more than 20 years.

    Key to this success has been our uncompromising pursuit of engineering excellence in all our products. For 25 years our product goals have been best-in-class performance, long-term reliability, and continuous development to keep each user at the cutting-edge of his chosen technology.

    CAM Products
    Our CAM solutions integrate PCB product engineering from your customer’s CAD system through your sales office and down to your shop-floor to cut out costs, speed up your production cycle and enhance yields, whether you make conventional, HDI, flexible or flex-rigid circuitry.

    Photoplotter Products
    Our laser photoplotters are accepted world-wide as the benchmark for accuracy, throughput and reliability. We offer a choice of “drop-in” models for customers who want the highest plot speed, or the finest features (down to 4micron), or the best all-round combination of speed, resolution and price.

    Local Support

    Providing customer with the right advice and therefor enhanced in productivity, is our priority! If there is any enquiries or support request, please contact us!

  • Geometric Correction System

    Today’s PCB design roadmap calls for higher densities and finer features. As registration tolerances become tighter, non-linear process distortions become increasingly critical. Existing tools which compensate only for linear distortions are no longer sufficient.

    Ucamco’s Geometric Correction System (GCS) provides a straightforward solution for both non-linear and linear process distortions. It allows to eliminate reproducible distortions in any production step.

    About Ucamco

    Ucamco (former Barco ETS) is a market leader in PCB CAM software and laser photoplotting systems. We have more than 25 years continuous experience developing and supporting leading-edge front-end tooling solutions for the global PCB industry. We help fabricators world-wide raise yields, increase factory productivity, and cut enterprise risks and costs.

    Today we have more than 1000 laser photoplotters and 5000 CAM systems installed around the world with local support in every major market. Our customers include the leading PCB fabricators across the global spectrum. Many of them have been with us for more than 20 years.

    Key to this success has been our uncompromising pursuit of engineering excellence in all our products. For 25 years our product goals have been best-in-class performance, long-term reliability, and continuous development to keep each user at the cutting-edge of his chosen technology.

    CAM Products
    Our CAM solutions integrate PCB product engineering from your customer’s CAD system through your sales office and down to your shop-floor to cut out costs, speed up your production cycle and enhance yields, whether you make conventional, HDI, flexible or flex-rigid circuitry.

    Photoplotter Products
    Our laser photoplotters are accepted world-wide as the benchmark for accuracy, throughput and reliability. We offer a choice of “drop-in” models for customers who want the highest plot speed, or the finest features (down to 4micron), or the best all-round combination of speed, resolution and price.

    Local Support

    Providing customer with the right advice and therefor enhanced in productivity, is our priority! If there is any enquiries or support request, please contact us!