DIS Technology

DIS Inc. located in NY / USA produce Multilayer registration systems with automatic-optical registration of the highest quality. Our engineers develop complete and custom-made solutions for automation tasks in the field of multilayer registration.

We have over a decade of experience with difficult multi-layer builds. This is more than any of our competitors. We have successfully processed thin cores down to 25uM (1mil), sub-laminations with micro-vias, delicate copper foil layers with holes etched into it, Teflon based materials (Rogers and Taconic), polyamide bond ply, and flex boards. We have processed boards up to 52 layers and have still not reached our limit. We have processed cap construction and foil construction. We have processed mixed construction with thin cores, sub-laminations and copper foil all in one panel. We have successfully welded heavy copper layers (up to 3 ounce, so far) and light copper (down to 1/3 ounce) layers.

Our agents have been carefully selected and are knowledgeable about DIS equipment, the multi-layer registration process and it’s applications. If there is some question that they cannot answer immediately, they will find the right answer.

 

  • Direct Optical Registration Systems

    A family of systems available to meet Production Volumes
    All systems will align inner layers to within +/- 17 micron (+/-0.7mils)

    PRS Standard :
    • The system will process all panel sizes from 305 x 355mm to 610 x 760mm (12" x 14" to 24" x 30" )
    • Simple touch screen controls
    • Ideal for prototype, small volume and high mix production
    Download :

     
     

    PRS L/U (with Loading & Unloading)
    • The system will process all panel sizes 406 x 406mm to 610 x 760mm (16” x 16” to 24” x 30” ).
    • Simple touch screen controls
    • Ideal for prototype and volume production
    • Load/Unload system for feed through processing
    Download :

     
     

    PRS Shuttle
    • The system will process all panel sizes from 330 x 355mm to 610 x 760mm (13” x 14” to 24” x 30” )
    • Simple touch screen controls
    • Ideal for higher volume production
    • Load/Unload system for feed through processing
    • Dual weld stations for increased throughput
    Download :

     
     

    PRS Shuttle Advance
    • All systems align inner layers to within +/- 17 micron (+/-0.7mils)
    • The system will process all panel sizes from 330 x 355mm to 610 x 710mm (13” x 14” to 24” x 28” )
    • Integrated Unloading Station
    • Welded panels are picked up and transported to the unload station and placed in a tray or a conveyor
    • Ideal for high volume production
    • Dual weld stations for increa
    • sed throughtput
    Download :

     
     

  • PWS Shuttle
    • Panel sizes from 255x305mm to 610x710mm (10" x 12" to 24" x 28" )
    • A program controls the weld time, hold time and cooling time
    • Alignment pins at the centerline locations (as specified by customer)
    • No templates needed
    • Dual weld stations for increased thruput
    • Designed for ergonomic throughput in a high volume PCB shop
    Download :

     
     

    PWS 100
    • Panel sizes from 255x305mm to 610x710mm (10" x 12" to 24" x 28" )
    • Welding profiles are stored via a touch control interface
    • A program enables full control of the weld time, hold time and cooling time
    • Alignment pins at the centerline locations
    • Pin cross bar allows lay-up of a second panel while the first panel is being welded
    • No templates needed
    • Quick and even release of welded panel from pins
    • Designed for maximum value in a PCB shop
    Download :

     
     

  •  

    WPS Stacker